(as of Jun 13, 2025 06:19:20 UTC – Details)
Product Description
JSAUX Extra Flexible Lazy Arm Phone Stand
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
For Different Sizes of Phones Hold Your Phone Securely
Endpoint Mount Joint – Rotational 360 degree joint. The phone spring clamp can be adjusted between 2.5-4.1 inches (64-105 mm). It can hold almost all cell phones well.
For Bedsides, Tabletops and More
The base clamp can be adjusted between 0-2.9 inches (0-75mm). Not just for bedside, it can clip on the headboard, bed frame, nightstand, recliner, coffee table, end table, kitchen counter or other tables.
Just Loosen and Twist
With flexible joints and the extendable arm, it’s very simple to adjust by loosening and twisting!!!
Phone Stand for Recording
Perfect for video watching/recording/desktop content creating/craft making/unboxing…
Perfect Balance of Sturdiness and Adjustability
Super sturdy and easy-to-adjust, so the phone never falls on your face.
Protect You From Neck Pain
It can free your hands and relieve your tired arms, protect you from neck pain and help you to get a nice viewing angle.
Try Upgraded JSAUX Phone Holder! Innovative multi-segment telescopic aluminum-zinc alloy design. Works better than gooseneck mount. It’s a unique phone stand for video recording, content creator kit. Suitable for YouTube/Tiktok/Instagram/Vlog starter, or anyone who demonstrates creations on social media. Perfect for video watching/recording/content creating/unboxing
Where can it work? In the bedroom, JSAUX phone clamp mount can sit on the edge of the headboard, bed frame, bedside or nightstand. In the living room, kitchen, study or work room, it can sit on the edge of coffee table, end table, kitchen counter or other tables. The base clamp can be adjusted between 0-2.9 inches or 0-75 mm
Can it relieve my tired arms? OF COURSE! JSAUX extra flexible lazy long arm phone stand can do it. By easy bending, with the flexibility of its arm, and the stability of the clip, you can get a willing viewing angle. Then watch videos, dramas, make phone calls, video record, selfie and more. Say bye to sore arms and protect you from neck pain
Is it easy to install and adjust? OF COURSE! Only three steps. #1 Rotare and loosen the bottom rotary sleeve. #2 Snap the bottom clip in the position to be fastened, tighten it. #3 Adjust the retractable aluminum tube and shaft to make the angle and height you want. NOTE: Be sure to fix the bottom clip before adjusting the angle and height. If you feel that the tightness of joint is not appropriate during use, you can adjust it with the “L” screwdriver
Is it suitable for my mobile phone? OF COURSE! JSAUX Universal Cell Phone Holder is compatible with iPhone 16/16 Pro/16 Plus/16 Pro Max/iPhone 15/15 Pro/15 Plus/15 Pro Max/iPhone 14/14 Pro/14 Pro Max/14 Plus/iPhone 13/13 Pro/13 Pro Max/13 mini/iPhone 12/12 Pro/12 Pro Max/12 mini/iPhone 11/11 Pro/11 Pro Max/iPhone X XR XS Max/iPhone 8, Samsung Galaxy, Google Pixel and almost all cell phones
Customers say
Customers find the phone holder solid and stable, with good functionality and design that looks clean. They appreciate its ease of use and quick setup, and one customer notes it works well on squared-off table edges. The adjustability and movement receive mixed feedback – while customers say it’s easy to adjust and moves well, some mention it’s not tight enough. The rotation angle is also a concern, with customers noting it’s hard to get the right tilt angle.
Puckish Writer –
The Best phone holder I’ve tried
This is the third phone holder I’ve tried and it’s the best. It doesn’t bounce when I tap my phone. It shifts easily between portrait and landscape without any need to readjust the arm. It’s sturdy and attaches easily to the portable desk that I use. Definitely recommend.
T. Doan –
Works Great
Worked very well on the vertical surface I was needing to mount my phone on!
NW family –
Just what I expected
Item is working very well. One tip: Extend the main rod in order to find the main bending joint. At first we only saw the joint near the phone holder and it took us a while to find it
D. Jenkins –
A very good phone stand: recommended. BTW, the 3rd joint is there: just pull up!
This stand is very good, considering the relative low cost. The desk clamp is nice and inconspicuous, unlike many of the common clamps used with the long extended threaded bolt and wing nut. This one looks very clean, with nothing extending below it. The only negative I have about the desk clamp is that it’s plastic. I can see a limited life due to this; but I realize that helps to keep the cost down.The articulation is not bad, though a bit rough due to what I’ll call a clam-shell joint style, as compared to more advanced joints; but, once again, I could guess it’s a cost saving measure. It’s worth pointing out, after seeing so many people give poor reviews claiming there is no 3rd joint: the 3rd metal joint is there, you just need to use force when extending the rods for the first timeâit will pop up from within the 2nd rod from the base. That’s really not fair for the seller to get bad reviews for a product that is not broken. The seller should pop a quick note in there with instructions about this.The only question about this stand is longevityâas with all articulating, weight-bearing apparatuses like this. There is only one metal joint, with the two towards the phone clamp being plastic. These use the same clam-shell style that the metal uses. As others have pointed out, the main metal joint does not allow for a clean 90° bend; I’m pretty certain it’s a 75° bend. The engineers must’ve determined this is a better angle for load bearing.The phone clamp is ok. It is spring loaded, so eventually that has got to weaken its grip.Before purchasing, I didn’t see the option for the “Plus”, which includes the tablet clamp. I probably would’ve purchased that one had I seen it.Lastly, I would like to see this same stand in a higher quality version: fully articulating, smooth motion joints, that adjust and stay as positionedâlike a monitor arm. I think people would pay the money if done right.
Tkls –
Upper bent arm remains bentâ¦
The upper rod wants to remain in the bent position shown in the photo, which isnât always best. I bought it to place beside my bed so I could watch news videos hands-free. The angle of that bent rodâarmâ isnât perfect for this purpose.
Amazon Customer –
Excellent phone holder!
Very sturdy and easy to adjust. Am finally getting rid of the pain in my neck from holding my smartphone. Very pleased with this purchase.
Sukay –
Great product
Awesome! No more dropping my phone. Hooks easily & quickly to my nightstand to use while Iâm in bed.
Olivia S. –
Works Great!
Exactly described and works awesome!!
Alex –
The product is good and I think the maximum height is much heigher than mentioned. Only issue that when used with a monitor on an arm, the combination is not as expected. Still, the product is solid.
BASS –
Excellent and sturdy product with very convenient price
Albe –
Ho acquistato questo supporto per smartphone e devo dire che si è rivelato una scelta davvero azzeccata. La struttura in metallo lo rende solido e stabile, senza vibrazioni, anche quando lo utilizzo per digitare sullo schermo. La cosa che mi ha colpito di più è la versatilità degli snodi: posso ruotare il telefono in qualsiasi posizione, sia verticale che orizzontale, senza che il supporto perda la sua stabilità . Si adatta perfettamente sia alla scrivania che alla testiera del letto, grazie alla sua morsa regolabile che può essere stretta saldamente su superfici diverse.Una caratteristica che ho apprezzato molto è la protezione in tessuto all’interno della morsa, che impedisce di graffiare i mobili su cui lo fisso. Inoltre, il design minimalista lo rende piacevole da vedere, senza risultare ingombrante o fuori luogo nellâambiente.Nonostante lâottima costruzione in metallo, le giunzioni sono in plastica, e questo mi ha fatto sorgere qualche dubbio sulla loro durabilità a lungo termine. Tuttavia, finora il prodotto ha mantenuto le sue promesse, rivelandosi un ottimo acquisto. Il rapporto qualità -prezzo è eccellente, considerando le sue caratteristiche avanzate rispetto a prodotti simili che richiedono più manipolazione per trovare la posizione corretta.Pro:â Struttura robusta e stabile: Il supporto in metallo mantiene il telefono fermo senza vibrazioni.â Regolabile a 360 gradi: Permette di posizionare lo smartphone come preferisco, sia in verticale che in orizzontale.â Protezione per superfici: Il tessuto inserito nella morsa evita di danneggiare i mobili.â Versatile: Adatto sia per la scrivania che per la testiera del letto.Contro:â Giunzioni in plastica: Potrebbero non essere molto durature nel lungo periodo.â Stringe meno su superfici morbide: Non garantisce la stessa stabilità se fissato su superfici non rigide.
TPay –
Je viens d’installer l’accessoire en quelques minutes sur un bureau de travail. Il est joli et de bonne facture (je l’ai pris en blanc mat). On peut l’orienter très facilement et son amplitude est satisfaisante.Par contre, il se règle en se positionnant par clics successifs. L’avantage est qu’il reste dans la position où le place, mais qu’on en peut pas le régler au centimètre près. Ce qui ne devrait pas être un problème pour la majorité des utilisateurs.
CmlOne –
Pratique et surtout solide. Ce qui me plaît vraiment c’est que je peux le fixer à tout ce que je veux. Que se soit à mon bureau, table basse et table à manger, qui sont d’épaisseurs différentes.J’ai trouvé le support qu’il me fallait, je recommande cet article